Common problems and solutions of radiators

1. The radiator is not hot; Treatment: Check whether the heat source is normal at the first time. If it is normal, it is because there is air in a part of the pipe that has not been removed. At this point, open the exhaust valve to exhaust the gas and it will be normal. (Note: When opening the exhaust valve, be careful not to open it too much at once, and look sideways to avoid burns!)
2. Attention should be paid to the use of independent gas wall mounted furnace heating systems; The outlet of the heat source furnace should be higher than the inlet of the radiator. Avoid the use of heat dissipation due to insufficient water flow pressure, which may hinder and slow down the water circulation inside the radiator!
3. Please connect the water inlet and outlet according to the excuse written on the packaging and informed by the manufacturer. If the connection is incorrect, it will not be hot.