The main function of the intelligent electric towel rack is not heating, but storing, drying, heating, moisture-proof and dehumidification. The electric towel rack is used to keep the bathroom dry and dry, and the towel is not easy to breed bacteria, which is beneficial to health; However, on the basis of these functions, the intelligent electric towel rack can also be used for auxiliary heating. Just turn on the auxiliary heating mode. In this mode, the electric towel rack will continue to heat at the highest temperature. When it is turned off, it needs to be turned off manually.
Generally, the electric towel rack that can be used for heating is a large-size model of more than 1m. In addition, try to select the model with large width and large number of heating tubes, so that the heat dissipation and drying effect are better; If the bathroom area is large or the heating requirements are high, it is recommended to install other heating equipment at the same time, and use the electric towel rack as a drying and auxiliary heating means, which is economical and practical.
Although the heating capacity of the electric towel rack is not as good as that of the radiator, it is also more practical to use the intelligent towel rack in the rainy and unheated southern areas. Especially for office workers, it is very comfortable to open the intelligent electric towel rack through the remote control of the mobile phone app during work and take a hot bath at home.
The drying towel rack is a practical bathroom accessory product, but many friends do not know where to install it. Generally speaking, the electric towel rack is installed in the bathroom. For the bathroom with dry and wet separation, it is generally not suitable to be installed in the wet area of the shower room. After all, it is an electric appliance. The installation principle stresses that it should be dry rather than wet, use the vacant area, and be moderate in height. It is ideal to install it next to the wash basin or above or side of the bathtub. Let's learn where the electric towel rack is installed!
We know that the drying towel rack is generally installed in the bathroom, but for the bathroom with dry and wet separation, is it better to put the drying towel rack in the wet area inside or in the dry area outside?
Many friends think that the electric towel rack uses electricity after all, and it is not good to contact the water source. In fact, this is not unreasonable. Although most of the electric towel racks now use heating tubes for heating, the heating tubes are protected by four layers of materials (the innermost heating body is special heating alloy wire, the second layer is Teflon high-temperature insulation material, the third layer is metal shielding layer, and the outermost layer is high-temperature PVC material as maintenance layer), Basically no electric leakage and other accidents will occur, and the safety performance is very high; However, the towel rack should be installed dry rather than wet. It is also appropriate to install the drying towel rack in the dry area of the bathroom.
